I am trying to setup a new RPI unit (a 3B+) but whenever I try to image the SD card (a recommended SDSDQED-008G-XI) the RPI will not load. I have tried a separate SD card with same results. I have also imaged the card with other Raspberry PI images and those all will successfully load, so only when I try to image with the 'meteobridge-rpi3-v1.3.bin' file that the process fails. I typically work on MacOS and have tried both the Etcher and Raspberry Pi Imager and both have the same unsuccessful results. I even tried to use a Win11 machine to create the image and it too fails to load. I have also tried the suggestion in other posts to do a FAT32 format first but no change.
I am aware from older posts that there was past compatibility issues with the 3B+, but the current requirements (https://www.meteobridge.com/wiki/index. ... g_Hardware) clearly show this is a supported configuration. I am at a loss as to what to try next. Does anyone have any suggestions on what options I can try.
Thanks!
I am aware from older posts that there was past compatibility issues with the 3B+, but the current requirements (https://www.meteobridge.com/wiki/index. ... g_Hardware) clearly show this is a supported configuration. I am at a loss as to what to try next. Does anyone have any suggestions on what options I can try.
Thanks!
Statistics: Posted by monymony — Thu Dec 21, 2023 12:07 am